2036 Aluminum pipe

2036 aluminum this is an early application of a kind of hard aluminum, commonly known as standard hard aluminum, with moderate strength, annealing, quenching and hot state plasticity is good, heat treatment can be strengthened, quenching and natural aging state in use, spot welding weldability is good.
2036 aluminum alloy features: high strength, a certain heat resistance, can be used for working parts below 150℃.
The strength of 2036 alloy is higher than that of 7075 alloy.

1070 Aluminum pipe

1070 aluminum has high plasticity, corrosion resistance, electrical conductivity and good thermal conductivity, but low strength, not through heat treatment to strengthen, cutting is not good, can accept contact welding, gas welding.
Make use of its advantages to manufacture some structural parts with specific performance, such as aluminum foil gaskets and capacitors, electronic tube isolation net, wire, cable protection sleeve, net, wire core and aircraft ventilation system parts and decorative parts.

1100 Aluminum pipe

1100 aluminum alloy is 99.0% ordinary industrial pure aluminum.
Heat treatment can not be strengthened; Low strength, but good ductility, formability, weldability and corrosion resistance
After anodic oxidation the corrosion resistance can be further improved and a beautiful surface can be obtained.

1050 Aluminum pipe

1050 aluminum alloy is formed by adding a small amount of copper in pure aluminum.
It has excellent forming characteristics, high corrosion resistance, good weldability and electrical conductivity.
Widely used in products with low strength requirements

5052 Aluminum pipe

5052 aluminum is Al-Mg alloy aluminum, magnesium is the main alloy element in
5052 alloy aluminum is the most widely used one kind of rustproof aluminum, this alloy has high strength, especially the fatigue strength: High plasticity and corrosion resistance, heat treatment can not be strengthened, in the semi-cold hardening plasticity is good, cold hardening plasticity is low, good corrosion resistance, good weldability, poor cutting performance, polishing.

2024 Aluminum pipe

2024 aluminum alloy, the main alloying elements are copper and magnesium.
Applications where high strength but low weight ratio is required, and good fatigue strength.
Not weldable , general processing performance.
Because of poor corrosion resistance, aluminum-zinc splints are often used as protection, which results in reduced fatigue strength.

6082-T6 Aluminum pipe

6082-T6 aluminum, the main alloying elements in the alloy are magnesium and silicon, with excellent processing performance, excellent weldability, extrusion and electroplating, good corrosion resistance, toughness, easy to polish, coating, excellent anodic oxidation effect, is a typical extrusion alloy.

2024-T3 Aluminum pipe

The mechanical properties of 2024-T3 aluminum alloy can be significantly improved after heat treatment. 2024 is a typical duralumin alloy in the aluminum-copper-magnesium system. It is a heat-treatable alloy with high strength, easy to work, easy to turn, and moderate corrosion resistance.

5754 Aluminum pipe

5754 aluminum alloy is a typical al-Mg alloy with moderate strength, good corrosion resistance, weldability and easy to be formed.
In foreign countries, 5754 aluminum alloy sheet with different heat treatment status is the main material used in automobile manufacturing industry (car doors, molds, seals) and can industry.

5083 Aluminum pipe

5083 belongs to Al-Mg-Si alloy, which is widely used, especially in the construction industry.
It is the most promising alloy. Good corrosion resistance, good weldability, good cold processing, and has moderate strength.
The main alloy element of 5083 is magnesium, which has good forming performance, corrosion resistance, weldability and medium strength.

7075-T6 Aluminum pipe

7075-T6 aluminum alloy hardness is 150HB, belongs to the high hardness aluminum alloy.
7075T6 aluminum alloy is precision machined aluminum in the United States, one of the most commercially available alloys.
The main alloying element of 7075 series is zinc, which has strong strength, good mechanical properties and anode reaction.

6063 Aluminum pipe

6063 aluminum alloy material.
The main alloy elements are magnesium and silicon, with excellent machining performance, excellent weldability, extrusion and electroplating, good corrosion resistance, toughness, easy to polish, color film, excellent anodic oxidation effect, is a typical extrusion alloy.
6063 aluminum alloy profile with its good plasticity, moderate heat treatment strength, good welding performance and anodic oxidation treatment, gorgeous surface color and many other advantages, is widely used in building profiles, irrigation pipes, for vehicles, platforms, furniture, elevators, fences and other tubes, bars, profiles.
< 12 >